Configuration¶
Everything is in plugins/EZvac/config.yml. Each setting has a comment there
too; this page explains them in plain words. Temperatures in config.yml are
always in °F, whatever units says (their keys end in -f), and durations are
in server ticks (20 ticks is normally one second; an in-game hour is
1,000 ticks).
Your config.yml stays up to date¶
- New settings are added for you. When an EZvac update adds settings, they
are written into your
config.ymlon startup, with their comments. Nothing you already have is changed, even where a default has since changed, and the previous file is kept asconfig.yml.before-<version>.bak. Aconfig.ymlthat can't be read is left alone. - A bad value in a 2.0 section doesn't stop EZvac. In
weather,humidity,dehumidifier,humidifierorvariance, that section uses its defaults and the log names the setting to fix. - A bad value in the other sections (controller, temperatures, speeds, airflow, audio) stops EZvac safely rather than running with settings that contradict each other. The log says which one.
Restart the server after editing config.yml.
units¶
units: F
F or C: the unit everyone sees and types temperatures in, on signs, in chat,
on the HUD and in placeholders. Typing 72F or 22C always works whatever
this says, so nobody sets 72 °C by habit. %ezvac_temp_f% and %ezvac_temp_c%
stay in their own unit.
Before 2.1 only the HUD could show Celsius, through hud.units. A config that
had hud.units: C starts with units: C when it's updated, and hud.units is
no longer read.
setup¶
setup:
done: true
Whether an admin has been through the first-start setup (BETA 1.0 Pilot 10),
or chosen not to. A new install writes done: false, and admins are asked in
chat when they join until someone finishes or skips it; servers upgrading
from an earlier version get true and are never asked. /hvac setup runs it
again whatever this says. See The setup.
updates¶
updates:
check: true
notify-admins: true
channel: auto
New in BETA 1.0. EZvac checks GitHub for a newer release in the background: once at start-up, then every 6 hours. It only reads GitHub's public list of releases.
- A newer one is logged, with a link.
notify-admins: players withezvac.adminare also told when they join, with a link they can click.channel(BETA 1.0 Pilot 2): which releases it hears about.stable: full releases and their hotfixes only, even on a pilot.pilot: pilots too, the test builds before a full release.auto, the default:piloton a pilot,stableon a full release. Quick settings › Updates switches it.- A newer Minecraft: when the newest release needs a newer Minecraft than the server runs (BETA 2.x needs 26.1 or newer), the message says so, and names the newest release that still runs on the server.
check: falseturns the background checks off./hvac updatestill checks when an admin asks (see Commands).
A failed check (no internet, GitHub busy) is logged once and tried again 6 hours later.
metrics¶
Anonymous usage statistics (BETA 1.0 Pilot 9), through bStats, so the project can see how many servers and players run EZvac and which versions are in use.
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | Send anonymous statistics. false stops them all for EZvac |
temperature-unit |
true | Whether the server shows Fahrenheit or Celsius |
unloaded-devices |
true | Whether devices run in unloaded chunks (simulation.unloaded-devices) |
systems |
true | The number of systems, in a band (such as 11-50), never the exact number |
addons |
true | Which of EZvac's official addons run, and their versions. Never any other plugin |
While enabled is true, bStats itself always sends, about every 30 minutes
and in the background: a random id that stands for the server, the players
online and online mode, the server software and version, the Java version,
the OS and the number of CPU cores, and EZvac's version. bStats works out
the country from where a report comes, and keeps only that. The four
settings above are EZvac's own charts, each sent only while its switch is
on. Nothing names a server or a player, and nothing is sent about what is
built or where. The totals are public on EZvac's bStats page.
/hvac quicksettings › Anonymous statistics lists what is always sent and
switches each of these at once. To turn statistics off for every plugin that
uses bStats, set enabled: false in plugins/bStats/config.yml.
addons¶
addons:
disabled: []
parts-disabled: []
parts-enabled: []
What /hvac addons has switched (BETA 1.0
Pilot 4): an addon by its plugin's name (EZclimates), a part as
Name/part (EZclimates/snow-and-ice). parts-enabled is for a part that
is off until a server switches it on, such as EZclimates' body temperature.
EZvac never downloads or installs an addon. With updates.check on, the
list of official addons and each installed one's newest release are read
from GitHub with EZvac's own update check.
ezdebug¶
ezdebug:
enabled: true
The built-in EZdebug (BETA 1.0 Pilot 5): while an admin holds the link tool
with a system selected, they see its equipment, signs and vents, the edge of
its room and the openings it leaks through. It stands down while the
EZdebug+ addon is installed and switched on. /hvac addons switches it.
devices¶
devices:
disabled: []
New in BETA 1.0. Device kinds switched off server-wide: heat-pump,
air-conditioner, furnace, boiler, pool-heat-pump, dehumidifier,
humidifier, air-purifier, and since Pilot 7 mini-fridge, fridge, refrigerator and deep-freezer. Devices of a kind listed here stop, and no
new one can be made; taken off the list, each runs again as it was set. A
name that is no kind is pointed out at start-up and ignored.
Quick settings switches them while the server runs, and writes the list here.
backups¶
backups:
auto-every-hours: 24
keep: 10
New in BETA 1.0. Backups of the registry go to plugins/EZvac/backups/.
auto-every-hours: 0 is off, or 4, 8, 12, 24, 48 or 168 (a week). It counts real time, through restarts. Any other value counts as off. Every 24 hours by default since BETA 1.0 Pilot 2; a server still at Pilot 1's 0 moves to 24 when it updates, and admins are told.keep: how many automatic backups are kept; older ones are deleted. Backups made by hand in quick settings are never deleted.
controller¶
When the thermostat acts.
| Setting | Default | Meaning |
|---|---|---|
period-ticks |
20 | How often systems are updated |
save-period-ticks |
600 | How often hvac.yml is saved |
display-period-ticks |
60 | How often every nearby sign is fully redrawn |
cooling-start-above-f |
1.0 | Cooling starts this far above the target |
heating-start-below-f |
1.0 | Heating starts this far below the target |
cooling-stop-below-f |
0.3 | Cooling stops this far below the target |
heating-stop-above-f |
0.3 | Heating stops this far above the target |
minimum-run-ticks |
300 | Equipment runs at least this long once started |
minimum-off-ticks |
200 | Equipment rests at least this long once stopped |
simulation¶
Devices in unloaded chunks (BETA 1.0 Pilot 8).
| Setting | Default | Meaning |
|---|---|---|
unloaded-devices |
true | Devices keep running while nobody is near: a thermostat keeps calling, its heat pumps and furnaces run, fridges and freezers stay cold, and dehumidifiers, humidifiers and purifiers serving a room keep working on it. false stops what is out of reach, as before Pilot 8 |
Out of reach, EZvac runs devices from what it last saw there: the size of the room and its openings, which units were clear to run, the air a fridge stood in. Nothing is placed or read in an unloaded chunk and no chunk is loaded: a unit's water or lava goes in once its chunk loads again, a purifier's filter that filled while away shows as spent then, and frost appears in a freezer. A room's size is saved with its thermostat, so a house nobody has visited since a restart still runs at its real size. It costs a few microseconds per system per cycle.
temperature¶
| Setting | Default | Meaning |
|---|---|---|
minimum-target-f, maximum-target-f |
60, 85 | The range a room thermostat accepts |
pool-minimum-target-f, pool-maximum-target-f |
75, 104 | The range a pool thermostat accepts |
cooling-f-per-minecraft-hour |
3.75 | How fast one unit at full speed cools |
heating-f-per-minecraft-hour |
5.0 | How fast one unit at full speed heats |
idle-drift-f-per-minecraft-hour |
1.25 | How fast a room with nothing running drifts toward the outdoors |
active-leak-f-per-minecraft-hour |
0.50 | How much the outdoors works against a running system |
maximum-group-capacity |
2.0 | The most a system delivers, in units of one ★★★ unit in a house its size. With sizing on, it applies after the size scales the units, so a small room heats at most twice as fast. (Named before groups became systems in 3.0) |
performance.variable-speed¶
Heat pumps, air conditioners and pool heat pumps slow down near the target.
| Setting | Default | Meaning |
|---|---|---|
approach-band-f |
3.0 | Within this of the target they start slowing |
minimum-capacity |
0.40 | The slowest they run, as a share of full |
minimum-rpm, maximum-rpm |
1200, 3600 | Speed range in the Normal profile |
eco-maximum-rpm, turbo-maximum-rpm |
2400, 4200 | Top speed in the Eco and Turbo profiles |
ramp-up-rpm-per-second, ramp-down-rpm-per-second |
900, 1200 | How fast they speed up and slow down |
This is the variable-speed (★★★) curve. The other tiers (3.1) are set beside it.
performance.tiers¶
The budget tiers (3.1). Variable-speed (★★★) isn't listed: it is the
variable-speed curve above at full capacity. See Tiers.
| Setting | Default | Meaning |
|---|---|---|
single-stage.capacity |
0.70 | What a single-stage unit delivers flat out, variable being 1 |
two-stage.capacity |
0.85 | What a two-stage unit delivers flat out |
two-stage.low-stage |
0.65 | Its low stage, as a share of flat out, within approach-band-f of the target |
airflow¶
| Setting | Default | Meaning |
|---|---|---|
core-range |
15 | Blocks of airflow at full strength |
maximum-range |
30 | Blocks of airflow before a system has no effect |
nodes-per-tick |
4000 | Work budget for working out airflow, per tick |
maximum-cells-per-system |
200000 | Most blocks one system's airflow covers |
sizing¶
New in BETA 1.0; see Sizing.
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | false: any size heats and cools as before BETA 1.0. Quick settings switches it while the server runs. A server upgrading from ALPHA gets false (BETA 1.0), so its builds don't change until the owner switches it on |
cells-per-unit |
1860 | Blocks of air one ★★★ unit heats or cools at the normal pace: a floor of about 465 blocks, 4 blocks high |
pool-cells-per-unit |
1500 | Blocks of water one ★★★ pool heater warms at the normal pace |
maximum-speed-up |
2.0 | The most a smaller system is sped up by |
outdoor-reach |
3 | Blocks the air reaches past a roof's edge, into open sky |
opening-leak |
1.1 | Extra leak per block of opening, per 1,000 blocks of air. One open door in a sized house leaks about twice as much as a sealed one |
maximum-openness |
6.0 | The most openings can multiply a sealed room's leak by |
neighbour-exchange |
10.0 | How fast systems whose air touches even out, per touching face |
audio¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | Turns all EZvac sounds on or off |
radius-blocks |
25.0 | Only players this close hear a sound |
hum-refresh-ticks |
60 | How often running equipment hums |
vent-airflow-refresh-ticks |
80 | How often running systems' vents play their airflow sound |
Sounds¶
Every sound is a line under audio.sounds: "sound volume pitch".
audio:
sounds:
equipment-hum: ["block.beacon.ambient 1.6 0.55"]
vent-airflow: ["block.conduit.ambient 0.3 0.5"]
| Event | Plays when |
|---|---|
equipment-hum |
heat pumps, air conditioners and boilers are running (every hum-refresh-ticks) |
equipment-start, equipment-stop |
those start and stop |
furnace-start, furnace-stop |
a furnace starts and stops |
unit-start, unit-stop |
a dehumidifier or humidifier switches on and off |
dehumidifier-start, dehumidifier-hum |
a dehumidifier starts, and while it runs |
dehumidifier-emptying |
a full tank starts to empty |
humidifier-bubbles |
now and then while a humidifier runs |
vent-airflow |
air vents of running systems near a player, one per cluster of vents |
- Lines in one list play together, and
[]silences that event. - The key can be any sound, a resource pack's own included. One the server doesn't know is still played (a resource pack may add it), and the log mentions it once.
- Pick mono sounds: stereo ones, such as
item.elytra.flying, sound the same at any distance. - The game only plays pitches from 0.5 to 2.0; others are brought into range with a warning.
- Sounds play at their block and fade with distance like any block sound.
audio.hum-volumeandaudio.hum-pitchfrom older configs are no longer read. A hum you tuned with them carried over intoequipment-humanddehumidifier-humwhen your config was updated.
displays¶
Every device shows on a floating screen in front of its sign. Since BETA 1.0
Pilot 4 that is the only display: screens is gone from this section, and a
value left in an older file isn't read.
| Setting | Default | Meaning |
|---|---|---|
screens |
true | A floating screen in front of every EZvac sign; false shows the plain signs only, which are no longer supported (BETA 1.0): they get no new lines and may be removed |
stars.full, stars.empty |
★, ☆ |
How equipment tiers are drawn: ★★☆ is Standard. Change them for a resource pack, or for Bedrock players through Geyser |
See Screens and control menus.
biome-blend¶
| Setting | Default | Meaning |
|---|---|---|
radius-blocks |
24 | How far around a spot biomes are averaged, 0-64; 0 turns transitions off |
See Climate.
seasons¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | false turns the seasons off everywhere |
days-per-season |
30 | Minecraft days in each season; four make a year. Change it any time (restart after): each world keeps its season and day of season. 15 before BETA 1.0 Pilot 4; a server on the stock 15 moved to 30 |
strength |
1.0 | How much of each biome's seasonal swing applies: 1 is realistic, 0.5 mild, 0 none (0-3) |
water-lag-days |
10.0 | How many days lakes and the sea follow behind the air; left out, a third of a season. 5 before Pilot 4, and a stock 5 moved to 10 with the seasons |
The calendar itself is kept in seasons.yml, not here; change it with
/hvac season. See Climate.
altitude¶
| Setting | Default | Meaning |
|---|---|---|
lapse-f-per-block |
0.1 | How much colder the air is for every block above from-y (0-1); 0 turns it off |
from-y |
64 | The height it starts from |
underground¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | false keeps the outdoor swing, seasons and weather all the way down |
start-depth |
4 | Blocks below the surface (or sea level, if lower) where the ground's steady temperature starts to take over |
full-depth |
20 | Where it has taken over completely; must be deeper than start-depth |
biomes¶
Every vanilla biome has a built-in climate (see the table in Climate). To change one, or to give a data pack's biome its own, add it by its id. Values are year-round averages at sea level; anything left out keeps the built-in value:
biomes:
minecraft:plains: { seasonal-f: 10 }
mypack:volcano: { noon-f: 120, midnight-f: 100, seasonal-f: 0, precipitation: none }
| Key | Meaning |
|---|---|
noon-f, midnight-f |
Average noon and midnight temperature. A biome EZvac doesn't know needs both |
seasonal-f |
How far mid-summer and mid-winter move from those averages |
precipitation |
rain, snow or none (a desert); EZvac's weather effects follow it |
A broken entry is skipped with a warning, and that biome keeps its built-in climate.
weather¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | Weather changes the outdoor air at all |
ease-hours |
2.0 | In-game hours for a change of weather to take full effect |
rain-cooling-f, thunder-cooling-f, snow-cooling-f |
6, 9, 3 | How much each cools the daily average |
swing-reduction |
0.6 | Share of the day/night swing full rain takes away |
water-share |
0.1 | Share of the air's change natural water follows |
wind-clear-ms, wind-rain-ms, wind-thunder-ms |
1.5, 3, 5 | Outdoor wind for "feels like", in m/s. With the daily wind on, wind-clear-ms is unused and rain and thunder add their difference from it to the day's wind |
snow-at-or-below-f |
33 | While it rains, snow falls where EZvac's air is this cold or colder, and rain elsewhere; each 64-block area decides together, from the air at its ground (BETA 1.0 Pilot 4; -40 to 50) |
snow-in-winter-below-f |
40 | The same line in winter, higher: real snow often falls a few degrees above freezing. 200 snows all winter wherever weather reaches (BETA 1.0 Pilot 4) |
dry-areas |
seasonal | Deserts, savannas and badlands in rain: seasonal (some rain spells reach them, by dry-rain-chance), never (dry, as vanilla), thunder (rain only in thunderstorms) or always (BETA 1.0 Pilot 4). Only where an addon such as EZclimates shows EZvac's rain: elsewhere players see Minecraft's, and dry areas stay dry |
dry-rain-chance |
spring 0.1, summer 0.05, autumn 0.1, winter 0.6 | Under seasonal, the share of rain spells that reach dry areas in each season (0 to 1). Each spell is decided once, as it starts, for the whole world; spring's is used with seasons off |
With enabled: false temperatures ignore the weather, but weather sensors
still report the sky. More in Climate.
wind¶
The daily wind (3.2). See Wind.
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | false: the fixed weather.wind-clear-ms, and wind changes nothing else |
chances |
calm 40, breezy 35, windy 18, gale 7 | How often each level comes up, as weights |
speeds-ms |
calm [0, 2], breezy [3, 6], windy [7, 12], gale [14, 20] | Each level's daily mean speed on open, level ground |
seasons |
spring 1.3, summer 0.7, autumn 1.3, winter 1.0 | How much each season scales the chance of a Windy or Gale day; Calm takes up the difference |
gusts |
0.25 | How far the wind swings around the day's mean, as a share of it (0-0.9) |
infiltration-per-ms |
0.05 | Extra air exchange per m/s of wind outside a room: at 0.05 a 20 m/s gale doubles it |
maximum-infiltration |
2.0 | The most wind multiplies a room's air exchange by |
dust |
1.5 | How much dust a wind over 6 m/s lifts where the ground is dry |
smoke-dispersal |
0.03 | Share of the outdoor PM2.5 the wind thins out per m/s, at most 40% |
pollen-spread |
0.06 | Share the wind adds to the outdoor pollen per m/s, at most 1.8x |
direction.variation |
1.0 | How far each day strays from its climate's usual direction: 0 never, 1 as in nature, up to 2 (BETA 1.0 Pilot 3) |
direction.fronts |
true | Whether rain turns the westerlies: south ahead of it, southwest while it rains, west-northwest after |
regions.enabled |
true | false: the same wind everywhere, terrain aside, as in 3.2 |
regions.size-blocks |
1500 | About how far across a region is (200-20000) |
regions.strength |
0.4 | How much windier or calmer a region can be, as a share of the day's speed (0-0.8); never more than about a level |
regions.drift-blocks-per-hour |
150 | How fast regions move downwind, per in-game hour (0-2000) |
units |
auto | auto (km/h with units: C, mph with units: F), ms, kmh or mph |
biomes |
{} |
Your own exposure per biome: 1 open ground, 0.5 a dense forest, 1.4 a mountain top, 0 none. For example minecraft:plains: 1.2 |
A bad value makes its section fall back to the defaults, with a warning.
humidity¶
| Setting | Default | Meaning |
|---|---|---|
outdoor-rh-dry, outdoor-rh-wet |
30, 90 | Outdoor RH in the driest and wettest biomes |
rain-rh |
97 | Outdoor RH that rain or snow pulls toward |
infiltration-per-hour |
0.15 | How fast a room's moisture follows the outdoors |
coil-dew-point-f |
45 | How dry cooling equipment can make the air |
cooling-dry-f-per-minecraft-hour |
4.0 | How fast cooling dries the air |
evaporation-f-per-minecraft-hour |
30.0 | How fast water in a room adds moisture |
feels-like¶
New in BETA 1.0 Pilot 4. See Climate.
| Setting | Default | Meaning |
|---|---|---|
sun |
true | Standing in the sun feels warmer than the shade. Only the feels-like of readings at a spot changes; weather stations stay in the shade |
sun-strength |
1.0 | How much: 1 as Steadman's formula (about 8 to 10 °F on a clear summer noon), 0 to 2 |
variance¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | Readings vary from spot to spot |
indoor-f, outdoor-f |
0.5, 1.5 | Most a reading strays in a room and outdoors |
pool-f, natural-water-f |
0.3, 0.8 | The same in a pool and in natural water |
dew-point-f |
0.3 | How much moisture varies |
spacing-blocks |
6.0 | How far apart the variance changes |
drift-hours |
3.0 | In-game hours over which a spot drifts to a new value |
dehumidifier and humidifier¶
| Setting | Dehumidifier | Humidifier | Meaning |
|---|---|---|---|
range |
30 | 30 | Reach of the unit's own space, in blocks of airflow |
maximum-cells |
50000 | 50000 | Most blocks that space covers |
dry-f-per-minecraft-hour / add-f-per-minecraft-hour |
3.0 | 3.0 | How fast it dries or adds moisture in a space of reference-cells |
reference-cells |
1500 | 1500 | Space size it works at full strength in; bigger is slower |
dry-dew-point-f |
35 | How dry its coil can make the air ("Air too cold" below this) | |
tank-fill-hours |
8.0 | In-game hours of full drying that fill the tank | |
empty-seconds |
30 | How long a full tank takes to empty | |
default-setpoint |
45 | 40 | Setpoint of a new unit, % RH |
presets |
35-60 | 30-50 | The setpoint range the control menu reaches, from the lowest to the highest, in steps of 5 |
hysteresis |
2.0 | 2.0 | How far past the setpoint before it starts again, % RH |
air-quality¶
refrigeration¶
Mini fridges, fridges, refrigerators and deep freezers (BETA 1.0 Pilot 7); see Refrigeration. Rates are per in-game hour.
| Setting | Default | |
|---|---|---|
enabled |
true | false lets every one of them warm up and sit idle |
fridge-default-f, deep-freezer-default-f, refrigerator-freezer-default-f |
37, −10, 0 | a new one's setpoints (a fridge holds 33 to 50 °F, a deep freezer −20 to 0 °F, a refrigerator's freezer −5 to 10 °F) |
pull-down-f-per-minecraft-hour |
20.0 | how fast a running compressor cools the barrel |
leak-per-minecraft-hour |
0.08 | the share of the gap to the air around it (its system's room, or outside) its inside closes, shut |
door-share, door-leak-factor |
0.15, 15.0 | opened, this share of the gap comes in at once (less when it was opened only a moment ago), and it leaks this many times faster while open |
hysteresis-f |
2.0 | it starts this far above its setpoint |
fridge-heat-f-per-minecraft-hour, freezer-heat-f-per-minecraft-hour |
0.3, 0.5 | what a running fridge (each barrel) and freezer add to its system's room; a refrigerator adds both, a mini fridge half a fridge's |
reference-cells |
1500 | the room size those are for; bigger rooms warm less |
frost.per-opening |
0.0025 | the frost each opening adds, of a full ring, in air of 50% RH (twice at 100%) |
frost.per-running-hour |
0.005 | the frost each in-game hour its compressor runs adds, at 50% RH |
frost.slowdown |
0.5 | a full ring slows its cooling by this share |
frost.auto-defrost-at |
0.6 | a refrigerator's freezer defrosts itself at this much frost, unless its Auto defrost is off; a deep freezer never does |
frost.defrost-minutes, frost.defrost-ceiling-f, frost.defrost-heat-f-per-minecraft-hour |
30.0, 26.0, 20.0 | a defrost's length in in-game minutes, and its heater, never warming the inside past the ceiling |
Air quality and air purifiers (3.2); see Air quality. Rates are per in-game hour.
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | false hides every air reading, and purifiers sit idle |
pollen |
true | false: no pollen outdoors or in, and readings say pollen is "Off" (BETA 1.0) |
reference-cells |
1500 | The space size sources and purifiers are quoted for. A bigger space dilutes both; a small one concentrates smoke, up to 4x |
settling |
fine 0.1, coarse 0.3, pollen 0.5 | Share of each kind that settles out of still air per hour |
system-filter |
fine 0.15, coarse 0.5, pollen 0.8 | Share a system's own filter takes out per hour while its equipment runs |
sources.campfire |
fine 20, coarse 8 | What a lit campfire or soul campfire adds per hour, µg/m³ at reference-cells |
sources.fire |
fine 25, coarse 10 | Fire and soul fire |
sources.lava |
fine 6, coarse 4 | Lava in or around the space |
sources.furnace |
fine 4, coarse 2 | A lit furnace (never EZvac's own). Before BETA 1.0 Pilot 4 smokers and blast furnaces too |
sources.smoker, sources.blast-furnace |
fine 6, coarse 2; fine 10, coarse 5 | A lit smoker, a lit blast furnace (BETA 1.0 Pilot 4) |
sources.candle |
fine 1, coarse 0 | A lit candle block |
sources.torch |
fine 0.3, coarse 0 | Each torch or lantern, soul and copper ones too; never a redstone torch (BETA 1.0 Pilot 4) |
outdoor-smoke.enabled |
true | Fires burning in the open (campfires, furnaces, smokers, blast furnaces, fire outside any room) spread smoke into the outdoor air downwind (BETA 1.0 Pilot 4) |
outdoor-smoke.reach-blocks, outdoor-smoke.strength |
96, 1.0 | How far it goes at most (8-256), and how thick it is (0-5) |
pollen-levels |
20, 80, 200 | Grains/m³ where pollen turns Moderate, High and Very high |
purifier.range, purifier.maximum-cells |
30, 50000 | Reach and size of a purifier's own space, as for a dehumidifier |
purifier.rate |
fine 2.5, coarse 2.5, pollen 3.0 | Share of each kind one purifier takes out per hour on High, at reference-cells |
purifier.speeds |
low 0.35, medium 0.65, high 1.0 | How hard each fan speed cleans, as a share of rate |
purifier.auto.medium-above-aqi, high-above-aqi |
50, 100 | Auto steps up to Medium or High past these AQIs |
purifier.auto.medium-pollen, high-pollen |
moderate, high | ...or at these pollen levels (moderate, high, very-high or never) |
purifier.auto.hysteresis |
20 | How far under a step the AQI must fall before Auto steps down |
purifier.filter-capacity |
2400 | What a filter holds, µg/m³ caught at reference-cells, pollen weighted. A few in-game days beside a campfire |
purifier.maximum-life-days |
60 | In-game days a filter lasts running nonstop on High in perfectly clean air; slower speeds last longer |
purifier.pollen-weight |
0.5 | How much a grain/m³ of pollen fills the filter against a µg/m³ of particles |
biomes |
none | Your own outdoor air per biome: minecraft:plains: { pollen: 40 }. Values left out keep EZvac's |
weather-stations¶
New in BETA 1.0. See Weather stations.
| Setting | Default | Meaning |
|---|---|---|
range |
400 | How near a player must be to a station to see its forecast with /hvac forecast, in blocks |
area-radius |
100 | How far each way a station measures the outdoor climate, in blocks |
area-height |
20 | How far above itself it measures, in blocks |
sparks |
true | Sparks at the rods of a station that is on, when a player is within 32 blocks |
hud¶
| Setting | Default | Meaning |
|---|---|---|
enabled |
true | The /hvac hud command works at all |
style |
sidebar | sidebar, actionbar or bossbar |
show-to-new-players |
false | Whether players who never chose see the HUD (BETA 1.0 Pilot 10). A player's own /hvac hud on or off always wins. The setup asks |
update-ticks |
10 | How often each player's HUD is refreshed |
none-text |
none | Shown where no system conditions the air |
sidebar.title, sidebar.lines |
The sidebar's title and lines | |
sidebar.yield-to-plugins |
TAB, … | Scoreboard plugins the sidebar steps aside for |
actionbar.format, bossbar.format |
The one-line formats | |
sections.hidden |
[] | Addon HUD sections never to show, by id, such as liveexposure:body (addon sections) |
bar |
style: gauge (BETA 1.0, the default: one line coloured cold to hot, with its gauge and marker symbols) or blocks (the filled and empty symbols and empty-color, as before); its length, and the cold-f/hot-f ends |
|
comfort |
The cold, cool, comfortable, warm and hot bands, each with its label, color and below-f/above-f |
|
water |
The same settings used while the player is in water |
Tokens and examples are in HUD and placeholders.